你好吗？
我还好。
真的吗？少来了，我知道你一点都不好。

多希望你知道。

目标~

五月中
答应自己
要练好身材

结果
工作一忙
就搁下了

好想在毕业时
可以在
最佳状态呢~

快正式毕业了
结果
还是没变
呜呜呜~

How to Install Cyanogen to SE Xperia X10 mini

To root into SE Xperia X10 mini:
--------------------------------
Download SuperOneClick from:
http://forum.xda-developers.com/showthread.php?t=803682
For Windows, make sure you have Microsoft .Net Framework 2.0 (or newer) installed.
Download any version of SuperOneClick you like, the newer the better.

Change phone setting to enable USB Debugging:
Settings -> Applications -> Development -> USB Debugging
Connect phone to PC and select "Charge Phone"
Open SuperOneClick and Click on "Root"
For Android 2.1 and above, initially it will fail, and then asking whether the OS is ver2.x.
Select yes.
Reboot the phone after finish rooting.

Install Root Explorer 2.2 into Android 1.6:
Copy the RootExplorer2.2.apk into phone SD card, and install like default.
Click "Allow" to enable Root Explorer accessing to /system

Install ClockworkMod Recovery:
------------------------------
Download CWM-recovery-3.2.0.0-r3-x10mini-Edify.zip (or newer) from:
http://forum.xda-developers.com/showthread.php?t=1105745
extract the zip file and copy whole files to micro SD card. Just any directory will do.
Using Root Explorer on phone, move the ./METAINF ./bin and ./xbin to (phone internal memory)/system,
and give permission 755(rwxr-xr-x) to files under ./bin and ./xbin.

*Make sure the default kernel is 2.1.1.A.0.6 SE firmware

Install MiniCM6.1
-----------------
Download the latest MiniCM6 ROM from the 'Downloads' page:
http://code.google.com/p/minicm/downloads/list

Rename the 'release'.zip file to update.zip
Copy the update.zip to your sdcard (top level). E.g via your PC or via 'adb push update.zip /sdcard/'
Reboot to CWM recovery
Keep a backup of your current status using CWM's Backup & Restore in case you want to restore.
Select 'wipe data/factory reset' if you were not already using MiniCM6
Select 'apply update from sdcard' from the top menu of CWM recovery
Reboot (first boot will take ~2 mins)

推荐

我是一个很懒惰看报纸的人。
感谢有《当今大马》（MalaysiaKini）的存在，
我还不至于与马来西亚政治脱节。
不管你有多不喜欢马来西亚，
不管以后的新闻有多糟糕，
了解它对我们还是由帮助的，
更何况它的新闻自由尚算没被政府阻挡。

www.malaysiakini.com

还有这个

www.merdekareview.com

How to regain My Documents for formatted windows

Especially when you had your password locked on your previous documents,
and the previous windows was corrupted.

Now the document is there, you need to regain the permission.
Please, use this only because you're the owner. Do not abuse.
God is watching you.

-Credit to a website I've forgotten-
------------------------------------
take ownership of the tree structure as the 'old' machine permissions are not understood by the new one.

from explorer, if xp pro, tools/folderoptions/view and uncheck 'use simple file sharing'

then go to the top level of the old docs & settings and do rclick sharing&security. there u'll see the 'advanced' button. click it and u'll find the 'owner' tab.

use owner tab to 'add' u'r current account and/or u'r current administrator. check the 'replace on subcontainers' checkbox and OK u'r way out.

Dialing up 2 Streamyx accounts using the same phone line

If you are lucky enough

to have 2 TMnet Streamyx accounts,

and you wish to dial both of them using same telephone line,

the answer is: You CAN do so!

These are the experiments that I’ve done with:

Experiment 1: (Success, no drawback)

Equipments:

1 x 5 port LAN switch – such as DLink DES-1005A

1 x modem – such as Riger DB102

1 x wireless LAN router – such as DLink DIR-300

Insert the telephone cable into modem，

LAN port of modem is connected to switch port，

One of switch’s LAN port is connected to router internet port，

Switch’s other LAN ports can be connected to computer that is used to dial the second line.

（Maybe can be more than 2 lines, each computer only can dial-up 1 line）

Modem’s function must be set as ‘bridge’，

that means we need to manual dial-up.

For wireless router, we can set it to auto-dial mode.

Computer which is connected to switch can dial-up the other account then!

Note：This computer is not in the same network as the other computers connected by router.

Experiment 2: (Success, but not fully success, side effect is wireless instability)

Equipment:

1 x wireless modem，like – Innacomm W3100

1 x LAN switch，like - DLink DES-1005A

The hardware setup is like usual.

Telephone line is plugged to wireless modem，

Wireless modem’s LAN port is connected to switch LAN port，

Switch LAN port is connected to all computers.

Only static IP address can be used here.

Again, wireless modem is set as ‘bridge’.

Now, make one computer as host

Host computer must be connected to switch using LAN cable.

Dial-up Properties setting is as figure below:

Example of Host IP configuration:

IP address: 192.168.0.1

Subnet Mask: 255.255.255.0

Default Gateway: 192.168.0.1 （following own IP address）

Example for those computers that connect internet through the host computer:

（same for wireless）

IP address: 192.168.0.2

Subnet Mask: 255.255.255.0

Default Gateway: 192.168.0.1 （following host’s IP address）

To dial-up another account,

the computer’s IP address needs to be static too, as below:

IP address: 192.168.0.2

Subnet Mask: 255.255.255.0

Default Gateway: -

I’ve tried both these methods.

For the second one, it is working,

but I’m not sure whether is

Innacomm W3100 wireless modem’s problem

Computers connecting using wireless keep disconnecting,

Damn it ><

If you’ve tried the 2^nd experiment,

and if your wireless network is stable,

do tell me which equipment(s) are you using,

and how you make it~

Now I wish make an advertisement:

Who has extra wireless router (I don’t want Wireless Modem Router)to be lent out?

Or having wireless router

But only need one LAN device to surf internet,

do contact me please~~

Thank you.

From:

DotA maniac

p/s: Some people ask for reason doing this way,

the advantage is

one line does not affect the other line.

While one is downloading heavily

another computer using the second line does not feel the lagness.

同一个电话线上两个Streamyx Account

如果你这么幸运

拥有两个TMnet Streamyx Account

又同时要在同一个电话线上的话

答案是：可以！

这是我试过的实验：

实验1: （100%成功，没副作用）

器材：

1 x 5 port LAN switch – 譬如DLink DES-1005A

1 x modem – 譬如Riger DB102

1 x wireless LAN router – 譬如DLink DIR-300

电话线插进modem，

Modem的LAN port 接去switch port，

Switch 其中一个 LAN port 接去router internet port，

Switch其他的LAN port可接去要用第二个streamyx account的电脑

（应该可以三个，甚至更多）

Modem的功能必须设定成bridge，

即是必须manual dial-up，

Wireless Router的设定可以是 auto-dial或是manual-dial

接去switch的电脑就可以自己dial-up另外一个account了！

注：接去switch的电脑和接去router的电脑

By default是没在同一个network的

实验二：（半成功，副作用是wireless不稳定）

器材：

1 x wireless modem，譬如 – Innacomm W3100

1 x LAN switch，譬如 - DLink DES-1005A

Hardware setup跟平时一样

电话线接去wireless modem，

Wireless modem的LAN port接去switch LAN port，

Switch LAN port接去全部电脑。

这里要用static IP address

Wireless Modem也是设定成Bridge，

即是不能Auto-dial

作为host的电脑必须用LAN cable

Dial-up Properties的设定如下图：

Host IP address 等设定例子：

IP address: 192.168.0.1

Subnet Mask: 255.255.255.0

Default Gateway: 192.168.0.1 （跟回自己的IP address）

其他要通过host上网的电脑 的IP address等等设定例子：

（Wireless上网的电脑设定也一样）

IP address: 192.168.0.2

Subnet Mask: 255.255.255.0

Default Gateway: 192.168.0.1 （跟Host的IP address）

要Dial-up另外一个account用的电脑最好也是static IP，如下：

IP address: 192.168.0.2

Subnet Mask: 255.255.255.0

Default Gateway: -

这种方法我试了，

可行，只是不知道是不是

Innacomm W3100 wireless modem的问题

Wireless上网的电脑就一直断线，

气死人了><

各位如果采用实验2的方法，

如果你的Wireless网络是稳定的话，

请告诉我你是用什么器材，

和怎么做到的~

喜欢研究这一类的朋友

希望能帮到你们。

顺便打个广告

谁有多余的Wireless Router （我不要Wireless Modem Router）可以借我？

或者是有Wireless Router

可是又只需要一个LAN上网的

联络联络我一下~~

感激不尽

来自：

DotA 发烧友

前言不对后语

许久不见CE gang
难得一次偶遇聚餐
发觉他们一如往常地——很忙~
而我也一如往常地——很得空~
看着他们
我还真有些惭愧
所以说了一句
不懂是要说
因为EE staffs 都很懒惰
所以EE 学生也跟着懒惰
说完后却也觉得
自己很不负责任

不懂是否过于幸福
现在的我
不到中午十二点
身体就是不乖乖起来
可能是因为太阳晒不到我的屁股

最近也才察觉
天气终于有点热度了
去年十二月到今年一月中
早上冷得像半夜
就~很~好~睡~
中午时就刚有清晨的气息
就到下午一直洋溢着
早上的味道
整个气候变了
那时就连在mamak档
喝得脚都在发抖

在这个变化无常的气候
大家好好照顾自己
对了
新年也要到了
别在这时候病倒哦
不然就吃不到好料了

恭喜发财
身体健康